VECTOR 600 XR

600 kg (1320 lbs)

The Vector 600-1320 XR is the all-rounder designed to allow installers to handle glass and panels with precision up to 5 mtrs (196”) from the ground. This machine comes with a variable speed remote control that allows for five degrees of movement including powered rotation.


The Vector 600-1320 XR is small enough to work in tight spaces yet, has the reach to install into second storey buildings. It can lift loads from the street side and carry the load down narrow walkways for installation at the back of the property.
The rough tread front wheels allow the Vector 600-1320 XR to travel over some uneven grounds that are firm underfoot.

  • Lifting capacity up to 600 kg / 1,320 lbs
  • Machine weight: 1,544 kg / 3,396 lbs
  • Three Stage Boom: 2 powered & 1 manual
  • Five Degrees of movement via Wired Remote
    • Elevation
    • Forward extension
    • Tilt vertical to horizontal
    • 360° Rotation
    • True side-shift at vacuum head
    • Manual Left and Right side pivot 90°
  • Dual vacuum system
  • Six adjustable vacuum cups
  • Front wheel drive with off road tread
  • Extra front wheels
  • Drives over firm uneven ground
  • Narrow 800mm / 31.5” width
  • Three-stage Boom To Reach Over 5m / 196”
  • Removable Vacuum Head with Storage Stand
  • Lifting Jib Hook Attachment
  • Hydraulic Rams For Durability With Precision

 

Handles:

  • Composite panels
  • Glass
  • Steel
  • Granite/Marble
  • Plastics
  • Wood doors

 

  • Vacuum cups and modified frame to lift curved glass
  • Foam Vacuum Pads for Stone
  • Purpose built trailer


Vacuum cups and modified
frame to lift curved glass (in-line cups to lift the spine of the curved glass)


Foam Vacuum Pads
for Stone

Dual front wheels

 

SPECIFICATIONS

Capacity: 800kg
Wired and Wireless (30mtr range) remote controls allow for precise glass movement
Hydraulic System: 24v / 1300watts
Battery: 2x 150 AMP HR
Charger: 110 - 220v x 20 AHr
Vacuum Pumps: 2 x 24V, 35 lit/min
Vacuum cup range - 1450mm - 2050mm
Vacuum cup range - 1450mm - 2050mm
No-Load Lifting: 18mm/s
No-Load Climbing: 8% Gradient
SIDE SHIFT - 110mm
Hydraulic rotation: 360°
Two front 18” puncture proof wheels (Option for two more)
Two rear 18” solid filled wheels
Outer wheels can be added for extra stability/traction
Backup wired remote control
Machine Weight: 1150kg, Counterweights: 550kg

TESTIMONIALS

Kym Wilson
Kym WilsonBayview Glazing QLD AUSTRALIA
Leer más
Just a quick note to say what a great piece of equipment. As I am a glazier that has a buggered back and now confined to the shiny seat in the office I reckon if the Nomad was around 25 years ago I would still be glazing commercial. We have just done our first two reglazes both 12.38 laminate 2400 x 3400 aprox 1000 off the ground in a local shop front. Last time it took 3hrs and 6 men to reglaze 1 panel only including scaffold and back pain. This time 4 people and the Nomad, no scaffold and 2 panels took 1 hour including loading the old 12.38 lam on the truck!!!!!! Possibly could have used 3 people but being the first time, are to be sure to be sure! Instant success and the knockers are now believers!! We set a frame approx 2 mtrs square up in the factory and used a piece of 8.38 lam for practice and used 6 people to glaze the panel two times each as a training session before tackling possibly the biggest reglazes in town. Thanks for the prompt service and I will recommend this machine and your business anywhere anytime. Regards extremely happy” Kym Wilson