VECTOR 800 CRAWLER

800 kg (1800 lbs)

The Vector 800-1800 Crawler is an extremely useful machine, whether glazing or craning up to 800 kg (1800 lbs). With its tracks that can widen, it can successfully traverse soft, muddy terrain without getting bogged. Narrowing the tracks, allows the Vector 800-1800 Crawler to pass though narrow doorways of 800 mm (31.5”).

The multistage boom with fly-jib can reach 5 mtrs (196”) together with the capacity to slew left and right 25 degrees. The Vector 800-1800 Crawler has safety features built in to prevent overloading and traversing grounds that are too steep. All functions and speed are controlled by wireless remote control with the backup manual levers on the machine if required.

The Vector 800-1800 Crawler can be used both for craning and as a pick & carry crane for loads up to 800kg (1800 lbs). The central platform allows the load to be placed on the chassis while driving to prevent the load swinging during transport. The tracks extended laterally to the side to provide extra stability during transport.

  • Lifting Capacity up to 800 kg / 1,800 lbs
  • Machine Weight: 1,945 kg / 4,288 lbs
  • Wireless remote operation of boom & driving
  • Adjustable machine width from 780mm / 30.5” to 1,150mm / 45”
  • 10 kW gasoline B & S engine
  • 4 kW AC Motor 240 V for indoor use
  • Three stage boom reaching to 5000 mm / 196”
  • Boom Working Angles: + 60° to – 30°
  • Drive Speed: 1.8 kmh (1.2 mph) up to 15° incline
  • Operating Temperature: -0°C / 32°F to 40°C / 104°F
  • Electric Key Start
  • Dual 230 mm / 9” Rubber Track
  • Vacuum System: Optional Glassboy
  • Optional Hydraulic Winch with 100M / 330ft cable
  • Optional Side Slew: total 50° (25° left and right)
  • Working Radius With Jib: 4200mm (165”)
  • Hook Height Max. With Jib: 5000mm (196”)
  • Boom Side Slew: + 25° And – 25
  • Optional Vacuum Glassboy

 

Handles:

  • Composite panels
  • Glass
  • Steel
  • Granite/Marble
  • Plastics
  • Wood doors

SPECIFICATIONS

Capacity: 800kg
Wired and Wireless (30mtr range) remote controls allow for precise glass movement
Hydraulic System: 24v / 1300watts
Battery: 2x 150 AMP HR
Charger: 110 - 220v x 20 AHr
Vacuum Pumps: 2 x 24V, 35 lit/min
Vacuum cup range - 1450mm - 2050mm
Vacuum cup range - 1450mm - 2050mm
No-Load Lifting: 18mm/s
No-Load Climbing: 8% Gradient
SIDE SHIFT - 110mm
Hydraulic rotation: 360°
Two front 18” puncture proof wheels (Option for two more)
Two rear 18” solid filled wheels
Outer wheels can be added for extra stability/traction
Backup wired remote control
Machine Weight: 1150kg, Counterweights: 550kg

TESTIMONIALS

Kym Wilson
Kym WilsonBayview Glazing QLD AUSTRALIA
Leer más
Just a quick note to say what a great piece of equipment. As I am a glazier that has a buggered back and now confined to the shiny seat in the office I reckon if the Nomad was around 25 years ago I would still be glazing commercial. We have just done our first two reglazes both 12.38 laminate 2400 x 3400 aprox 1000 off the ground in a local shop front. Last time it took 3hrs and 6 men to reglaze 1 panel only including scaffold and back pain. This time 4 people and the Nomad, no scaffold and 2 panels took 1 hour including loading the old 12.38 lam on the truck!!!!!! Possibly could have used 3 people but being the first time, are to be sure to be sure! Instant success and the knockers are now believers!! We set a frame approx 2 mtrs square up in the factory and used a piece of 8.38 lam for practice and used 6 people to glaze the panel two times each as a training session before tackling possibly the biggest reglazes in town. Thanks for the prompt service and I will recommend this machine and your business anywhere anytime. Regards extremely happy” Kym Wilson